Aide à la sélection

FEAC-T-032A-P-0.0M
22070000012

Charging device outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with type 2 charging device plugs for installation in electric vehicle charging stations (EVSE)

Comparaison

Type de produits

Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

    • Aperçu
    • Caractéristiques techniques
    • Accessoires
    • Certification
    • Caractéristiques commerciales
    • Télécharger

    Les certificates des produits

    Les avantages des produits

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. Modèle 3D
    2. Environmental conditions
    3. Electrical characteristics
    4. Mechanical properties
    5. Installation
    6. Marking material
    7. Locking device
    8. Lock actuator
    9. Cable
    10. Bag
    11. Temperature Sensor
    12. Environmental Product Compliance
    13. Dimension

    Modèle 3D

    Environmental conditions

    Maximum altitude5000m(Above sea level )
    Ambient temperature (operation)- 30 °C ~ 50 °C
    Ambient temperature (storage / transport)- 40 °C ~ 80 °C
    IP classIP54(protection cover)

    Electrical characteristics

    Maximum charge power26KW
    Phase3
    Power pin quantity5
    Rated current of high-power contacts32
    Power contact rated voltage480
    Quantity of signal contacts2
    Signal contact rated current2
    Signal contact rated voltage30
    Signal transmission typePulse width adjustment
    Connection method precautionsScrew connection
    Temperature measurementNTC

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force< 100N
    Pull out force< 100N

    Installation

    Available installation locationRear board installation
    Limit of the installation locationOnly allow 0 to 90 degrees frontal tilt
    Lock actuator installation locationTop center, can only be installed at the rear
    Mounting hole diameter6.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basisProvided according to customer requirements
    Contact surface materialAg
    Marking materialPlastic

    Locking device

    Lock typeSecured by locking device after insertion

    Lock actuator

    Poles of pluggable connectors3
    Motor possible supply voltage range9-15.5V
    Response time1s
    Service life10000 times load
    Ambient temperature (operation)_40 °C ... 80 °C
    Cable length0.4m

    Cable

    Cable composition2 x6 mm² + 1 x 10 mm² + 2× 0.75 mm²
    5*6mm²+2*0.75mm²

    Bag

    colorBlue

    Temperature Sensor

    Sensor typeNTC
    Temperature range_30 °C ... 200 °C

    Environmental Product Compliance

    REACHconform
    China RoHSconform

    Dimension

    Depth101mm
    Hole diameter58 mm x 61 mm
    Wire length0m
    0.4 m (Lock the actuator cable )
    width99mm
    Height127.3mm

    TUV parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 480V
    Rated current 32A
    IP class IP54
    Numéro de la commande 22070000012
    Unité d'emballage 5pcs/box
    Quantité minimale de commande 5
    Le poid de produit (sans emballage) 13.65
    3D
    FEAC-T-032A-P-03-0.0M-11AH.stp Télécharger
    CAD Data
    FEAC-T-032A-P-03-0.0M-11AH.dxf Télécharger
    Data
    FEAC-T-032A-P-03-0.0M-11A(H).pdf Télécharger
    Consultation en ligne
    FEAC-T-032A-P-0.0M_Prise de charge de la station de charge _Prises de charge _Charge pour l'électromobilité _DEGSON高松,全球知名工业连接器产品和整体解决方案提供商
    Aide à la sélection

    FEAC-T-032A-P-0.0M-22070000012

    Charging device outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with type 2 charging device plugs for installation in electric vehicle charging stations (EVSE)

    Comparaison

    Type de produits

    Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

      • Aperçu
      • Caractéristiques techniques
      • Accessoires
      • Certification
      • Caractéristiques commerciales
      • Télécharger

      Les certificates des produits

      Les avantages des produits

      ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
      ☑The surface of power and signal contacts are silver-plated
      ☑Certified to IATF 16949:2016
      ☑Ergonomic and easy to operate
      1. Modèle 3D
      2. Environmental conditions
      3. Electrical characteristics
      4. Mechanical properties
      5. Installation
      6. Marking material
      7. Locking device
      8. Lock actuator
      9. Cable
      10. Bag
      11. Temperature Sensor
      12. Environmental Product Compliance
      13. Dimension

      Modèle 3D

      Environmental conditions

      Maximum altitude5000m(Above sea level )
      Ambient temperature (operation)- 30 °C ~ 50 °C
      Ambient temperature (storage / transport)- 40 °C ~ 80 °C
      IP classIP54(protection cover)

      Electrical characteristics

      Maximum charge power26KW
      Phase3
      Power pin quantity5
      Rated current of high-power contacts32
      Power contact rated voltage480
      Quantity of signal contacts2
      Signal contact rated current2
      Signal contact rated voltage30
      Signal transmission typePulse width adjustment
      Connection method precautionsScrew connection
      Temperature measurementNTC

      Mechanical properties

      Insertion/pullout cycle10000
      Insertion force< 100N
      Pull out force< 100N

      Installation

      Available installation locationRear board installation
      Limit of the installation locationOnly allow 0 to 90 degrees frontal tilt
      Lock actuator installation locationTop center, can only be installed at the rear
      Mounting hole diameter6.00 mm (ø)

      Marking material

      Shell colorblack
      Customization basisProvided according to customer requirements
      Contact surface materialAg
      Marking materialPlastic

      Locking device

      Lock typeSecured by locking device after insertion

      Lock actuator

      Poles of pluggable connectors3
      Motor possible supply voltage range9-15.5V
      Response time1s
      Service life10000 times load
      Ambient temperature (operation)_40 °C ... 80 °C
      Cable length0.4m

      Cable

      Cable composition2 x6 mm² + 1 x 10 mm² + 2× 0.75 mm²
      5*6mm²+2*0.75mm²

      Bag

      colorBlue

      Temperature Sensor

      Sensor typeNTC
      Temperature range_30 °C ... 200 °C

      Environmental Product Compliance

      REACHconform
      China RoHSconform

      Dimension

      Depth101mm
      Hole diameter58 mm x 61 mm
      Wire length0m
      0.4 m (Lock the actuator cable )
      width99mm
      Height127.3mm

      TUV parameters

      Overvoltage category/Degree of pollution III/3
      Rated voltage 480V
      Rated current 32A
      IP class IP54
      Numéro de la commande 22070000012
      Unité d'emballage 5pcs/box
      Quantité minimale de commande 5
      Le poid de produit (sans emballage) 13.65
      3D
      FEAC-T-032A-P-03-0.0M-11AH.stp Télécharger
      CAD Data
      FEAC-T-032A-P-03-0.0M-11AH.dxf Télécharger
      Data
      FEAC-T-032A-P-03-0.0M-11A(H).pdf Télécharger
      Consultation en ligne