Interface module-DT010-00A(H)
30040000095
16 positions input output module,with indicator light,with screw connector and IDC stitching line,can access 16 positionsNPN/PNP signal,can be installed on DIN35 rail
- 16
- 20
- 28
- 30
- 32
- 1A
- Aperçu
- Caractéristiques techniques
- Accessoires
- Certification
- Caractéristiques commerciales
- Télécharger
Les avantages des produits
Suitable for 16-point (20-bit interface) controller, Screw connection- Modèle 3D
- Environmental data
- Standards/Regulations
- Technical data
- Connection data 1
- Connection data 2
- Dimension
Modèle 3D
Environmental data
| Ambient temperature (operation) | -20 °C ... 70 °C |
| Ambient temperature (storage / transport) | -20 °C ... 70 °C |
Standards/Regulations
| Standards/Regulations | IEC61810 |
| Pollution level | 3 |
| Overvoltage category | Ⅲ |
| Rated overvoltage | 0.5kV |
| Flame retardant grade, in line with UL94 | V0 |
Technical data
| Installation location | Arbitrary |
| Maximum allowable working voltage | 30VDC |
| Maximum allowable current | 1A |
| Signal points | 16 |
| Status Display | Yes |
Connection data 1
| Connection name | Control system side |
| Connection method | IDC connection |
| Connection volume | 1 |
| Number of digits | 20 |
| spacing | 2.54mm |
Connection data 2
| Connection name | On-site side |
| Stripping length | 6-7mm |
| Cross section of flexible conductor | 1.0 mm² ... 2.5 mm² |
| Connectable guide cross section AWG | 28-12AWG |
| Connection meets standards | UL1059 |
| Connection method | Screw connection |
| Connection volume | 1 |
| Number of digits | 18 |
| screw thread | M3 |
| Hard wire cross section | 1.0 mm² ... 2.5 mm² |
Dimension
| length | 65.5mm |
| width | 57mm |
| Height | 43mm |
Accessories
| Wire harness | DX213-1S-500-00A(H) |
| Numéro de la commande | 30040000095 |
| Unité d'emballage | 1 |
| Quantité minimale de commande | 10 |
| Le poid de produit (sans emballage) | 87 |
Partie correspondante
- Tous le produits de support(3)
- Produits connexes(0)